Sometimes when I’m bitching about joint pain Danny points out I am probably becoming a Pak protector. Uncanny since I really love wearing vests and eating sweet potatoes and would love to be the superintelligent fighting machine protector of entire planets, ringworlds, or whatever, while fixing and inventing things and reading libraries full of books.
Anyway, someone stole my tool bag which was crammed full of many years full of useful things. My mini soldering iron and my tiny level and well, nearly everything. The less useful tools are in the house in a tool drawer if you feel like coming to take them to complete my inability to fix things. OMG! Anyway, I have been slowly researching and plotting my new tool collection. Everything will be either very nice, and tiny as possible so it fits my hand and is maybe super ergonomic, or old, well made, vintage tools with really nice heft and design that I will magically find in garage sales and flea markets. I may go with the technique of having several canvas rolls with pockets, inside a big bag without a lot of separate compartments.
Today I went off to go to Workingman’s Headquarters which is that shop run by two old guys in the Mission (planning to just explain my list of tools and trust to the one of them who is nice’s judgement) I had been planning to stay in bed most of the day but the sun came out and I felt so tempted to wander around. Since the shop was shut I got a burrito and sat in the amphitheater-like area in the back of the 24th St. BART plaza listening to cheerful music and watching people. I nearly got a chair massage but instead I was looking at all the people with kind of janky old wheelchairs and who were having trouble carrying their stuff while on crutches. I took some notes on what I thought people might need for repair or modifications but didn’t go around talking with people, I want to think about it first and try some things out.
While on crutches myself I arrived as many people do at the idea that you can have a drink bottle with clip attached to your pants or belt or backpack loops. Mine would clank around but I got used to it. It is too hard otherwise to carry a drink. I also wore my keys and bus pass around my neck or on a Key-Bak type of device (which always makes me think of my friend Sabina since her grandfather invented it).
I was also thinking of talking with Corbett the other day about putting d-rings and webbing on available bits of wheelchair, and knob things to keep my backpack from slipping off my seat back, and how I was talking with Claire about Design Patterns and how there are mobility/accessibility patterns and antipatterns. Most crutches and many chairs lack places to attach or hook other things. You can go into a bike store and find things designed to clamp around bikes. Some of these work with wheelchairs and some don’t. Anyway, attachment points, or attachability, should be a design pattern for mobility equipment.
When you enter the Cripsterhood you should be issued a crapton of sticky backed velcro, cable ties, duct tape, hose clamps, pvc pipe lengths, and bungee cords along with your Durable Medical Equipment!
My foam padding with velcro strap and buckle hack is still KIND OF working on my TravelScoot front pole. Looks gross but it protects my knees from being bruised on the adjustable clamp. I also have a wire frame water bottle holder I got from a bike shop clamped on with velcro straps. The image in my mind here was that I want several rings or hooks that stick out from the scooter frame, so that I can attach stuff to them. I am not sure what. A beer opener would be a good start.
At the hardware store I came up with the idea of getting some cheap pipe straps, bending them around the scooter frame tubes, and fastening them with eyebolts or s-hooks. I tried it out and it worked pretty well. A 2-hole pipe strap is curved in a half circle and meant to be fastened to a flat surface. Instead I fastened it to itself. The size I got cost 50 cents and the eyebolt a dollar fifty. That is probably cheaper and less messy than velcro in the long run. Now I can hang something from a keyring or keyback or carabiner from my scooter steering column. I may do the same at many points around the frame to see how that works out. The problem is that it sticks out and the end of the bolt is a bit too long. A shorter bolt or a plastic cover to screw onto the end would improve the design.
I also wonder if the bolts might get in the way when people are folding or carrying the scooter. The nice thing is I have not had to drill into the scooter frame and taking off the eyebolts is super easy if I don’t like them.
While I was hypnotized by mobility gear at the BART plaza and wandering around the hardware store aisles I also realized I could fix my loose footrests. The foot rests on my TravelScoot fold upwards for compactness, like folding bike pedals. I often want to fold them upwards on the bus so that the sticking out bits won’t trip anyone. They are floppy and tightening them didn’t help. So, I found some neoprene washers intending to put them inside the footrest joint.
This didn’t quite work as planned since even after I got the bolt out, the pedal itself would not come out. I think if I had several more, and stronger, hands, I could have bent the metal a little and popped out the footrest. Since I don’t have either I just put the neoprene on the outside of the joint on both sides of the bolt. Hey! It now holds the pedal nicely folded upward. But when I look at it, clearly it isn’t going to last. I think one or two metal locking washers would be a better fix if I have to stick to the outside of the joint.
I got a lovely new tiny vise grip which is much better than trying to do this with an adjustable wrench or needlenose pliers like every other time I have messed with this beast. Yay vise grip! It’s so cute. The few tools that escaped are in the Mozilla Taiwan bag that I got at our last work conference which had chopsticks in it. Mini hex key with just 2 sizes (one perfect for scooter), 2 screwdrivers, pliers, scissors etc. And now my new best friend the tiny clamping thing.
The best way for me to tighten this (keeping in mind my hands hurt and are not strong) was to carefully stick the vise grip on the bolt, set it, then put a screwdriver through the eyebolt and turn it like a sort of handle or lever.
Meanwhile today Danny messed with our servers and Ada and Milo designed a card based combat system for her birthday party’s LARP’s climactic battle. Zach came over to get his packages and we discussed tools and comic books and I cooked him an omelet. His sound engineer guy is now hanging out at Noisebridge and Zach made him a glowing programmable LED sign with his DJ name on it (I only saw photos.) It was a nice day…
If you have tools to recommend to me, please have at it in the comments!Related posts: